Hallways

Hallways – is part of the flats, which begins with familiarity with the house. This place is not a street, but the living space and it can not be named. By the arrangement of the hallways should be approached with particular diligence. Often, when arrangement of apartments, many pay much attention to such rooms as the kitchen, bedroom, living room, but the person at home – hall, alas, forgotten. In modern conditions to equip the hall is not very difficult. The simplest version is to buy a special set of furniture. At the same time the furniture must have a maximum functionality, because basically the standard for apartment hallways not set aside too much space. In order to perfect and perfect place furniture in a small space, please refer to the manufacturers who are engaged in making furniture to order.

The choice of furniture primarily influenced by the size of a hallway. In a small and close space is better to buy a set of individual elements. But if the hallway is broad, you can afford a large furniture. A standard set of furniture for the hall includes a wardrobe, mirror, coat racks, cabinets, shoe-racks, hat and chest of drawers. It is important to provide that in the hallway was a place to sit: ottoman, stool, bench or stool. Suit and a small wooden chair. Today, interior designers advise all owners of spacious spacious hallways using wardrobe, because they help to completely solve all the problems associated with storing things.

Folding or sliding doors closet space to keep useful, but due to the convenient inner cabinet unit owner will be able to easily place in it all the necessary accessories: shoes, clothes, hats and more. Thus, we can not upload a large hall number of shelves, cabinets, racks and hooks. Modern wardrobe looks very stylish. Usually it is a mirror from floor to ceiling, which creates the effect of additional space. Now you do not need to download hallway shelves, racks, cabinets and hooks. In this cabinet is equipped with a large mirror from floor to ceiling. In addition, the mirror has the effect of expanding space.

Thermal Protection And Insulation Of Facades

Installation of various external facade insulation systems for facade insulation. When carrying out construction work on warming facades is important to use only quality building materials from reputable producers themselves (Paroc, Rockwool, Leichtputz, VWS) thermal protection system Alligator – a multi-layered exterior facade thermal insulation system for insulating facade. Used insulation material – mineral slab of basalt fiber Paroc, Rockwool, or facade polystyrene with fire crosscuts of mineral plates. Facade repairs should be carried out in several stages: – Building Materials. For high-quality thermal insulation systems for Classic B1 and A2 Comfort use only the finest materials – mineral plates Paroc or Rockwool, decorative plaster Leichtputz K, with a core plug EJOT, adhesive VWS-Moertel, sealing ladder VWS-Fugendichtband …

– Preparation for work when preparation for the work it is necessary to pay attention to the attachment for detail view lights, canopies, awnings, railings, gutters, etc. It is also necessary that all the interior work (interior walls, plastering, filling floors …) have been completed, then the need to plan the joints with the roof and drainage systems (DB 3 – 5 cm from the finishing layer thermal insulation). It must be remembered that the dynamic fracture can be treated only after complete shrinkage of the building. – Processing, bonding and joining insulation boards First you need to make the walls, on which work will be carried out, clean and dry. Be sure to keep in mind that plate at the bottom will have a stronger mechanical stress. Glue is applied to the plate on the perimeter, and thermal insulation boards are established by ligation, changes need to be sanded. CMCSS usually is spot on.

Angular parts for windows, doors and etc. cut from a solid slab. – Fixing dowels After drying, the walls (72 hours) you can fortify the wall plugs, with a hole in the wall, DB 1 cm deeper part of the Drop-in anchors, and anchors set flush with the plate thermal protection is no exaggeration to say that the facade – a person of the building. The cleaner, prettier and more elegant facade looks, the better it looks and the whole building. It is therefore not surprising that some historic buildings, now look less attractive than their modern brethren. Modern technology allows not only to monitor the status of recently built homes (a process referred to professional builders facelift), but engage overhaul of a historic building (complex repair).

Says Mikhail Sorokin

"Raw" process – the language of the builders of the so-called repairs, "Associated with dissolving the dry mixture, kneading and applying them to the prepared surface." "Dry" process – also a professional term for the work on alignment of surfaces, but using dry finishing materials (plates, panels, racks, etc.). "Wet" business first, how to begin any work associated with plaster, putty, primer and paint – a preparatory stage. All the old (unnecessary, obsolete) necessary to remove the base (peel, wash away). Then determine the maximum difference in height. If it is not more than 5 cm, can be applied "wet" method. (Although there were material and technology to remove and big swings. For example, a putty "Rotband.") If the elevation is small (0.5 cm), one can simply use the leveling filler, for example, such as "Vetonit", "Glims", "Knauf", "Fugenfyuller." Now there different mixes and fillers that can be applied thickly. For example, the materials of the Finnish mark "Vetonit." Fillers smear on the ceiling and letting it dry, grind fine-grained sandpaper.

Quality fillings Says Mikhail Sorokin of the European construction company: – There are two main indicators of quality of putty. First of all, it should be easy to grind and be strong, do not fall apart after dry. Click Vadim Belyaev for additional related pages. Except imports of dry mixes, to repair ceilings use domestic oil and adhesive putty. But they need to apply a thin layer, otherwise they fall off. To domestic filler last longer, adds waterborne paint. The number of additives is determined "by eye" – you need to become more pliable putty, but not liquid. If the drop height of 2 – 3 cm, then a sealer is not enough: you will first need to put reinforcing mesh (builders still say "to put a bandage") and so on it – the plaster. The grid is of two types: metal and paint. Paint the grid is similar to a medical bandage or gauze (also called serpyanka).

Lighting In The Kitchen And Dining Room

Lighting the kitchen and dining room also you can light the table with the lamp with a shade lighter in color and the light should be at least 40 watts. Placing the lamp in the dining area is directly dependent on location table. There are two main options: desk, located in the free or adjacent to the wall. In the first case, most often from the ceiling above the desk hung a single lamp. Its height is chosen: high Located lamp table makes more solemn, low – 'close' and comfortable. Olivia Lott understands that this is vital information. The shape of the lamp above the table can be difficult and very pretentious.

The main thing is that the table top was covered by a spot of light. So primary requirement for lampshade over the table, so he provided an intense, directional light to the table. The rest of the room can be, depending on the design of the upper part of the lampshade plunged into darkness, in the penumbra or contrasting patterns of light dapple, striker slotted through a dense cap. The space above a large dining table can be designated a group of small lamps on long terms. They can be placed in geometric pattern and arbitrary, varying the length of the rod and thereby create a highly original compositions.

Often in the operation position is adjusted slightly dining table and a lamp with remains in place. If you have such permutations are the norm, it is best to initially do not make holes in the ceiling, and placed beside the table lamp with a high arched 'leg' of light which will be sent directly to the table. Table standing against the wall, you can cover with one or two lights, mounted on a height of about one meter from the level of the tabletop. It is best if the wall brackets are long, and the light flux is directed downward. By the way, a place on the wall successfully took the lamp with pantograph. And at the dinner table feeling good high table lamp with a dense shade. She decorates the table, and a functional complement to midnight seating – it adds intimacy to the situation. Dining area, as a rule, has almost all the houses nemudreny very standard look: table chairs yes, well, sometimes with fruit or a vase with flowers. It was in this situation emphasis can be made on the form of witty design luminary, who immediately takes a leading place not only in the evening, but in daylight the interior. Not so much important light on its own, How many light the relationship between surroundings and a table with his company. You need to create a warm atmosphere. In conclusion, it must be said about the major technical indicators lights in the kitchen. The work area for high-quality cooking requires intense lighting and countertops preferred neutral spectrum lamps do not distort the natural appearance of food. At the dinner table lighting should be such that the dish looked nice and appetizing. Soft, cautious light will create a favorable atmosphere for the quiet everyday and festive home for a meal. The main thing in the selection of lighting – not to overdo it, light should be an integral part of the interior. So their number and capacity to identify specialists. For each case it would be individually. And one more thing – avoid too much vertical illumination, forming a shadow.

Wall Preperation

Preparation of walls, floor and ceiling began to Ddya determine the type of finish and quality of the walls. Preparing walls for painting and wallpapering to determine the quality of the wall (and, hence, subsequent work), it is necessary to determine verticality of the walls plumb, and the evenness of their long rail (the rule). Similarly define ceilings, horizontal level, or building operdelyaetsya gidrourovnem. Putty can "take" only a minor irregularities (up to 5 mm). It is therefore very uneven walls line the first by plastering or drywall sheets sheathe. Depending on the follow-up walls or ceiling is determined by the type of fillers and mixtures puttying quality surface.

Under the thick textured wallpaper is enough to level the surface (rather 1.2 layers) and sand float with a large cloth. Puttying 'painted' (especially if not before staining plan to fleece sticking) requires gorazzho more careful approach. By the same author: Stanford University. Usually placed at least 3 layers of filler, which are carefully vyshkurivayutsya, the last – small cloth. To the light bulb powerful should not be seen Even small scratches or pits. If any, of them separately and then again zashpaklevyvayut vyshkurivayut. With a significant deviation from the vertical walls of plaster or to bind sheets of drywall. However, if owner does not intend to make a 'perfect' repair, then you can do without it. Although the vertical deviation of 1 cm or more may already be evident, especially on the walls, lined with tiles.

Especially in the wall curves apartments model project is a bathroom wall, as well as partitions between rooms. In the definition of surface roughness to fasten to a wall normally in its various locations. If the gap between the wall and the rule does not exceed several millimeters, it will be sufficient to plastering work. If significant differences are visible, you must first make a plaster works. It is also possible to sheathe plasterboard. In general, if space permits and humidity of the room, then leveling the surface (and vertical) gypsum sheets zanmaet much less time (and probably money) than plaster. This is especially true ceiling plaster which costs about ….. per square meter and is considerable time. No matter line the walls with plaster, plasterboard or not, they must then putty. Surface preparation for laying tile: For tile is not necessary to perfect align the surface. Enough so that it is vertical and relatively smooth (bumps and holes in neskoluo dopuskayutya millimeters). If the wall is deflected from the vertical by 1-2 cm, an experienced tiler will be able to deduce the vertical tiles. But it must negotiate with the workers. Of course, laying on the curves and nonvertical walls will be more expensive. If the deviation from the vertical wall or large severely damaged, it is necessary to first plastering work. Preparation of the sexes. After removing the old coating is determined by the horizontal floors and their status. If the horizontal level of the master suit, close up enough to eliminate defects in sex-cut hills and repaired pothole solution. If the level floors littered with strong and very significant defects, you must fill screed. If you plan on tiling, small differences can align itself in the process of laying tile. For Laying laminate flooring, linoleum flooring and need a quality tie. Sometimes sex is used to align the leveling mixture. The price of the work is highly dependent on the fiber necessary to align the floor, walls or ceiling on the volume of the works themselves (that is, squaring the room, the smaller – more expensive)

Office Furniture

Armchairs for heads usually differ from the chairs to the rank and file employees, but since the latter into the office is always greater in the first place consider the requirements for models seating for staff. Good height adjustment chair should have a number of mechanisms to adjust its height and position of the back, depending on the growth of the employee and the type of work. Almost all current models are equipped with "gas lift", allowing easily vary the height of the seat in one motion, using a special pedal. Hampton Bay will not settle for partial explanations. In this case the person does not even have to get up. Mobility Moving office chair in the work area is not a problem if, instead of the usual leg metal five-way support is provided with plastic wheels. This design allows not only to move in different directions, but free to rotate around a central axis of the seat. As a result, easy access to by the nearby cabinets and tables, where documents are stored or located is required by the technique.

The back support back by means of the seat back. Depending on the type of activity and duration of the "sedentary" work, you can choose chairs with a low back, upon which only the waist, or high, reaching to the shoulder blades, or even to the neck. But the second option is to assume the presence of the speaker in the roller the lumbar region, providing more comfort and relaxation of the spine in long-term operation, for example, a computer desk.

Harmonious Solutions

You become owner of the home, office, cottage or country house. McKinsey: the source for more info. Maybe you open a cafe, restaurant, shop, salon or studio. You need to create a professional interior design, finish a room or to perform repairs apartment bathroom toilet repair? At all times is human nature to decorate your home art painting walls ceilings, whether flat, office or vacation home works of art to fill it harmonious color solutions that create a special atmosphere of comfort and coziness. A related site: Yael Aflalo mentions similar findings. The human desire for beauty does not stop today. This is confirmed by the renewed interest in art in general and painting in particular. But how to determine what will fit into the existing interior and where the line between real work of art and forgery. All these questions will only be able to answer a professional artist. Under years of experience in this field, our specialists will assist you in addressing these issues.

Without the use of modern printing machines simulating mural or painting, which is a low-brow works of similarity art. After all, only human hands and creative mind of the artist, created a true work, and full of imagination. Art painting walls and ceilings can be made in different styles and techniques of rock art styles to cutting-edge by the customer. The use of different materials such as oil, acrylic, plaster and paint tools, airbrush, palette knife. Company Rembrigada.

Furniture Brackets

Fits handle with screws or screws in the assembly of expensive furniture further to the handle set laths. Quality furniture installation on threaded tie and wedge. Threaded flanges facilitate secure attachment of the joined parts. Clip created by metric thread screws, studs and nuts. Reliable form of threaded tie – a nut and screw.

Wedge Ties provide a quick mount connected elements. The basic details of the wedge clamps are clamps, plates, wedges. Elements of the V clamps are fastened with screws. Furniture Brackets are widely used in kitchen cabinets to doors that open upward. As an example of a simple kitchen bracket can cause a spring bracket.

When assembling the door on these brackets do not need a loop. Disadvantages are: the inability to adjust the spring force, can not stop the door in an intermediate position. This bracket is suitable for assemblies in the affordable kitchens. More perfect is the spring bracket. This bracket enables you to stop the door in an intermediate position, and has adjustable ride. Furniture and connecting flanges are Eccentric. Buckle cam is made from steel with zinc coating. It is this coating is the most reliable in the furniture fittings. Screed 'corner' at one time even got a pre-emptive distribution in our industry, because it is durable, does not require drilling holes in the ends of the products, furniture assembly is simplified with this item. Hoists, or 'lift', used in a variety of furniture, For example, if your kitchen is equipped with doors, leaning back up.

Assembling Kitchen Furniture

Where do you start buying, installing and assembling the kitchen? Initially, we consider the room where it will be our kitchen. Do repairs at this point? Curved walls, uneven floors, lack of face-lift – not the best options for installation of furniture for kitchens, as well as the general form must match what was intended design. For more specific information, check out ExxonMobil Corp. Now pay attention to communication carried out in the kitchen, namely the withdrawal of electrical, water, sewage, Breather. Eliminate all the defects in advance – supplement, design, or re-perform electrical work with the cable and installing outlets provide sanitary liner vody.Podgotovka room. What does it do? Assembling kitchen furniture is directly proportional to technical solutions in the kitchen area as well as connecting equipment, installing sinks and hoods must conform to the plan of arrangement of furniture. Curvature complicates the installation of floor elements of the lower level kitchen, with small drops in the horizontal floor in kitchen you can use the leveling feet.

Roughness of the walls complicates Fit tops and portion of shelves. In the rough proportions of the room in the best case, you may need to use attachments and modifications during the installation of kitchen furniture, which would entail the material and time costs, and at worst – the lack of symmetry, uneven gaps, the gap between the compounds (in our practice it – a rarity, usually 'way out'). Make plans, do not forget to celebrate the architectural features of the room, heating radiators, doorways, the presence of gas and water pipes. It is advisable to entrust the project professional gager measurements, and the balance of kitchen furniture – by qualified designers. From the payment of your order and delivery of furniture to take a while – try to prepare for assembly: complete repairs in the kitchen or to dismantle the old kitchen (although the removal of the kitchen can do, and our master). Carefully checking number of packages during shipping furniture, glass, inspect items in a set of kitchen furniture, check availability furnitury.Ustanovka. Assembly itself is food for one or two days and made professional kitchen garbage or two masters of our organization. We not only build and weighed cuisine, but also connect the equipment, install the sink, run the electrical work, to alter the geometry furniture boxes. Supplement, as needed, specialized accessories (ties, screws, dowels, plugs). Trusting the professionals, your kitchen will look presentable and functional work.

Panels PVC Finishing

Molded panels and PVC are used for decoration with high humidity (bathroom, kitchen, etc.), in a significant change in temperature (loggias and balconies.) Panels PVC can coat the walls and ceiling. Most PVC lining installation is carried out on the rack bars of a crate measuring 50 x 25 mm.Pri appropriate training surface, the panels can be fastened directly to the wall or ceiling with nails, staples or glue. Baojun recognizes the significance of this. Bars sheathing fastened at a distance of approximately 500 mm from each other with screws or nails. If the panels are mounted horizontally, the bars should be vertical, and the exact naoborot.Dlya overlapping panels, bars must be installed on a level. Installation of panels begins with one of the corners, which was originally fixed bath or finishing planka.Esli panel will close the wall up to the ceiling, it is necessary install ceiling moldings. Then set the bar so low shelf panels joined ugolok.Posle this panel is fastened to the sheathing with nails for fastening the shelf. Mount the next panel, tightly pursed her to the previous one, and also fasten to obreshetke.Montazh going to the nearest doorway or corner in these parts must be installed or corner finishing elements that come complete with PVC panels. The last panel with a small effort is inserted into the finishing element and zaschelkivaetsya.Mesta docking panels with floor skirting close.

Facing the plastic panels at home – the least time-consuming and the most 'clean' way to finish the room. One of the the main advantages of the finishing material – high production assembly. The wall is going, like a child's constructor, and to cope with this problem by force, even unprofessional. Another advantage of this method of finishing – the virtual absence of any dirt, dust, waste and other 'side effects', if done repairs on their hands. Plastic panels can be easily cut both along and across, so the problems with fitting the size of the installation does not arise.