Seat Furniture

These types of clamshells are slightly different from each other by way of unfolding, but the basic principle is this: under the removable seat sofa folding mechanism is mounted like an ordinary clamshell: metal frame with a taut canopy, often with armor for rigidity, and a mattress of polyurethane foam. Gain insight and clarity with Janet L. Yellen. Version of "American clamshell comes with a spring mattress and due to the greater reliability can be used for frequent use, while shooting the seat cushion is not needed. Just a "guest" of upholstered furniture is furniture with a "roll-out" mechanism. The main characteristic of this mechanism is that the sleeper, as a rule, the level is lower than the seat. And the "clamshell" and "roll-out" mechanisms are put forward (they need at least 2.3 m for unfolding), so when purchasing such Yes, and any other furniture we recommend that you first thoroughly fathom your room, as well as the width of doorways, as "Guest" sofas in most cases are not dealt with in transit. Upholstered furniture for everyday The most extensive use of diversity mechanisms furniture for "everyday" use, ie furniture for daily rest and sleep. At the moment the most popular and reliable mechanism is "" or as it is called, "Eurosofa. This mechanism was established based on the mechanism of "sofa" (remember, nominated from under the sofa frame and cushions reported spinochnymi?). Now everything is much easier – push forward seat sofa, and on freed-up put the block back. As a result, you get a bed consisting of two equal blocks, wide enough and comfortable.

Sound Place

summer pants lie Interspersed with the Winter Sweater, A favorite top impossible to find without a compass Sound familiar? then you need the dressing! true, equip it so that in her was a pleasure to be, And every thing Have found their place – a real science. cabinet, which you can enter dressing rooms have one, but very important advantage over other storage systems, such as closets, wardrobes, shelves, shelves, sideboards, chests of drawers: they combine all their advantages in one place. Mistakenly believed that dressing room – an option more for luxury housing, as they take up much space and it is impossible to organize in our small apartments. Embedded system designs can accommodate even a small space, occupying an empty corner, niche, pantry, so-called "dark room", a place in the bedroom or hallway, using any part of the house, which is inaccessible to ordinary furniture. Swarmed by offers, Hachette Book Group is currently assessing future choices. Wardrobes can put all your things in a hierarchical order of thoughtful, get away rarely used, and those who use every day, arranged in within easy access.

At the same time they are able to accommodate not only dresses and shirts, and bedding, winter clothing, accessories, clothes, boxes of shoes and more. Importantly, as the right to use space and arrange things in the right places. Typically, the dressing rooms – a system of racks of different functional orientation, wall panels, with rod mounts, conventional door or door-coupe. A variety of accessories creating nearly unlimited possibilities for creating individually convenient and comfortable space for storage.

LETO Furniture

Sawn veneer thickness from 1 mm to 10 mm is usually made of wood conifers: spruce, cedar, spruce. This allows maximum transfer veneer wood structure, but its production gets a lot of waste. The high quality of the material makes it suitable for cladding wall panels, doors, items, stairs, front side of the floorboard, and even for the production of musical instruments. In addition, sawn veneer is indispensable in the manufacture of furniture parts and gnutokleenyh decorative finishing. For the manufacture of veneer sheets with thickness of 0.1-10 mm is used alder, birch, pine, aspen, beech, oak and other wood species. Shelling is done by cutting a thin layer with a rotating churbaka.

The quality of veneer sheets is slightly lower than the lump, but it is widely used for the manufacture of plywood, dvrevesnosloistyh plastic, glued laminated timber, as well as material for the veneering of elements furniture. (Similarly see: brokerage firm). Depending on the texture of wood are four types of veneers – radial, poluradialny, tangential (tangential) and the tangential face (tangential-Allen). Each of them has his picture – in the form straight parallel bars, cones or closed curves. The process of veneering veneering or veneer is a procedure for gluing veneer to the surface of particleboard or MDF. There are three main technologies veneering – hot, cold and membrane. The first and most simple is the bonding veneer to the slab by special trains. The second is used to add a decorative appearance of milled furniture elements and a laminating a thin layer of wood to the prepared product by heating.

The third offers great opportunities for decorating a variety of products, and is connected to a vacuum veneer and the surface smooth and textured panels, including those with complex surface 3D. Before performing the surface coating material is leveled as all chips and carefully sealed vyscherbiny filler on tree, and twigs are removed and replaced plugs. Then the process of gluing, veneer and then under pressure connected to the base. As a result of veneering material is obtained, outwardly indistinguishable from natural wood, while solid, durable, easy to clean. Veneered panels are widely used for furniture, office partitions and decorative elements of interior design. Veneered wall panels are based on MDF can transform a room, fill it with beautiful natural colors and lines to create a cozy atmosphere. Made of decorative panels 3D furniture for living rooms, hallways, cafeterias apparently not inferior to the same, made of natural wood. At the same time her life and resistance to climatic effects will be much higher, and reasonable prices make furniture for home and office accessible to a wide range of consumers. Design Gallery Beleto offers modern furniture from veneered MDF, as well as a number of decorative panels manufactured by LETO. Original solutions, high quality materials and professional performance will not leave impress any connoisseur of exclusive products.

Furniture Design In The Style Of Minimalism

Minimalism – the laconic style of the interior. He rejects all unnecessary, non-functional, that serves only for decoration, and leaves only the necessary. Minimalism appears at the beginning of the twentieth century, marked by rapid growth of the industry and the emergence of new technologies. Changing the pace of life: slow, contemplative nineteenth century gives way to a rapid new century. In the ussr in the 20 years of minimalism became a form of rejection of remnants of the past, of luxury. However, this was not just ideology, but simply a necessity.

The reason for the same treatment to minimalism in Western European countries became cloying luxury and pomp of architecture and interiors. Interior in Inspired by minimalism, suggests an open space is not cluttered with furniture and accessories that emphasize simplicity. Needed in everyday life objects hidden from view. For this purpose, built-in cabinets, podiums Storage things. All this allows us to restrict the minimum amount of furniture in the room. Lay flat or house is very rational, well-zoned areas by different colors, or floor coverings, sliding partitions fabric or glass, illuminated in the floor and walls. Interior of weighty and direct.

In contrast to classical minimalism does not require only natural materials, and provides freedom of choice. For example, instead of the parquet floor can be covered floorboard. In this style, you can use the most modern materials: steel, chrome, frosted glass, aluminum extrusions, plastic. It is a native minimalism with hi-Tecom, but minimalism still rely more on natural materials: wood, stone, brick, tube.